• Fully automated microprocessor based controller.
• Chambers are made up of thick stainless steel tested with pressure (superior grade).
• Highly accurate free scale semiconductor pressure sensor for 2.2 kg (121-135° deg centigrade).
• Silicon rubber gasket in the door, silicon tubes used in outlet water.
• Screw handle for door locking prevents sudden opening of door.
• Highly accurate temperature sensor used P. T – 100.
• Auto cut off function.
• Used heater coil is of 2000 watts.
• Table top front load autoclave.
• Blue and white bright seven segment LED display is used to show temperature, pressure, error & time.
• Parameters saved can be used for next cycle.
• Once program is set , if the power supply is stopped suddenly, the cycle can be started without any resetting.
• Tone buzzer to produce same tones during all operations.
• If there is any fault in the pressure and temperature sensor, the error will be displayed.
• Message display on screen once the process is completed and then the next process starts.
• The outlet water tank is inbuilt within the autoclave itself.
• If the PCB gets failed, the door can’t be opened due to pressure inside, therefore open the manually operated pressure valve and release the pressure, then open the door.
• The body can be cleaned by wet cloth. It is free from rust.
• When the water is not filled in the cylinder it automatically shows H2O error.