• Robust and rugged all weld construction which is leak proof unlike riveted construction.
• Inner chamber is made of thick plate stainless steel 304 quality and jacket is made out of stainless steel 304.
• Sterilizer is hydraulically tested to withstand 2.5 times the working pressure up to 40psi.
• Glass wool which prevents heat losses due to radiation and is covered by strong stainless steel sheet insulation upto 60 MM.
• Boiler made of thick stainless-steel plate suitably placed under the sterilizer.
• High grade flanged type heating elements are fitted on front side for easy replacement/repair.
• Fitted with water gauge glass for water level safety, water inlet and drain valves.
• Cycle do not start if door is open or not locked properly.
• This device protects the heaters in the generator from burning out dry.
• Drain valve is fitted at the side bottom for easy draining/cleaning.
• Works on 440 volts, 3 Phase AC supply.

• The steam pressure in the boiler is indicated on an individual pressure gauge. safety lock for door is fitted with automatic door system which cannot be opened when the chamber is under pressure.
• The sterilizer is provided with triple safety
• Unit is also fitted with low water level cut off device and automatic pressure control device
• PT-100 sensor used
• Temperature 121°to 134°
• Automatic alarm for low water, power failure, phase out, temperature pressure etc
• Fitted with vacuum breaker to break vacuum in case of formation of vacuum due to steam condensation
• Pre vacuum & post vacuum
• Alphanumeric printer in built in machine
• Sliding door for HPHV cycle
• This equipment comes with PLC/HMI controller
• Piping system made of SS & pneumatic valves are used
• SS loading & unloading trolley
• Steam working pressure 1.5 to 2.5 kg/cm2